Sherwood Scuba Insight Manuel du propriétaire Page 45

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 100
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 44
45
INSIGHT
A
S
A
S
SET ELAPSED DIVE TIME ALARM ON/OFF
Factory set ON, the ELAPSED DIVE TIME (EDT or Bottom Time) ALARM can also be set OFF.
When set OFF, the Alarm will not sound when EDT increases.
To access SET ELAPSED DIVE TIME (EDT) ALARM while viewing the SET 2 GO TO screen,
press/release the A button (4 or 5 times) until the Set screen appears (Fig. 42) -
• Alpha graphics EDT and AL
• Set Point graphic ON (or OFF) flashing, with DIVE TIME icons
> Pressing and releasing the S button toggles between ON and OFF.
> Pressing and releasing the A button saves the Set Point and advances to SET EDT ALARM
VALUE (if set ON) or SET RESERVE TIME ALARM (if set OFF).
> Depressing both buttons for 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SET ELAPSED DIVE TIME ALARM VALUE
Factory set for 3:00 (hr:min), the ELAPSED DIVE TIME (EDT) ALARM VALUE can be set from
:10 to 3:00 (hr:min) in increments of :05 (:min).
After saving ON as the setting for EDT ALARM ON/OFF, the SET EDT ALARM VALUE screen ap-
pears with the Set Point flashing. Information displayed includes (Fig. 43) -
• Alpha graphics EDT and AL
• EDT Alarm Set Point (hr:min) flashing, with DIVE and TIME icons
Fig. 42 - Set EDT Alarm
Fig. 43 - Set EDT Alarm
Value
Vue de la page 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 99 100

Commentaires sur ces manuels

Pas de commentaire